A complete Confined Space Ventilation System provides proper ventilation to workers in confined spaces who may be at risk from lack of oxygen and from toxic or explosive gases.

Provide proper ventilation to workers in confined spaces who may be at risk from lack of oxygen and from toxic or explosive gases with a complete Confined Space Ventilation Kit.

Use the handy Apapter Reducer to reduce a 16” blower output duct to an 8” duct.

Durable, wire-reinforced yellow 8"-diameter ducting is available in lengths of 6', 15' and 25'. Yellow 16"-diameter ducting is available in 15' and 25' lengths.

Store your ducting conveniently and efficiently in a Ducting Storage Rack.

Ventilation Ducting is made of wire-reinforced yellow vinyl polyester. 8”-diameter ducting is available in lengths of 6', 15' and 25'. 16"-diameter ducting is available in 15' and 25' lengths.

The Duct-to-Duct Connector safely joins two pieces of 8” or 16” ducting to extend ducting length. Constructed of galvanized steel.

This combination ventiliation fan and duct storage unit is constructed of rugged polyethylene.

Lightweight Venturi Blowers are designed to remove poisonous, hazardous, or explosive fumes from process towers, tanks or confined spaces. They also work well for cooling workers or heavy equipment in high-heat environments by providing a blast of directed air.

Venturi-Style Blowers ventilate explosive and hazardous vapors and fumes safely and effectively. Often called "Air Horns", they are constructed of lightweight galvanized steel with a cast aluminum base.

Ventilate remote confined spaces quickly and effectively with this high-output Gasoline-Powered Blower.

The Heavy-Duty Explosionproof Blower is powered by a single-phase 3/4 HP electric motor.

The Explosionproof Electric Blower is wired for use with a 25' cord and is designed for use in the harshest environments.

Hook multiple blowers in a series to run long sections of ducting.

The AC Axial Explosionproof Blower is constructed of tough steel and features a 1/3 HP single-phase electric motor.

Constructed of tough steel, the AC Axial Explosionproof Blower features a 1/3 HP single-phase electric motor and a NEMA rated 115v plug and explosionproof socket.

16" Explosionproof Blower combines the 16" Standard Blower with an Explosionproof UL/CSA listed, single phase motor.

The lightweight Com-PAX-ial Blower utilizes a venturi inlet which increases cubic feet per minute output and provides excellent ventilation in confined space environments.

The 16" Standard Blower is powered by a 1/2 HP AC electric motor.

The 1/2 HP Economy Electric Blower features an aluminum nonsparking blower wheel designed for harsh environments.

The 1/3 HP Standard Centrifugal Blower has a rugged ABS plastic housing for long-lasting durability.

The 3/4 HP Electric Blower features an aluminum nonsparking blower wheel designed for harsh environments.

The Carpet Dryer Blower is both powerful and lightweight, and is ideal for use in the quick drying of wet carpets, floors or walls.

The 3/4 HP High-Output Centrifugal Blower has a rugged ABS plastic housing for long-lasting durability.

The 8” Com-PAX-ial Blower is constructed of UV- and chemical-resistant polyethylene. The result is a rugged but extremely lightweight Blower which can be easily transported for versatile on-site use.

The AC Axial Blower with Canister is a complete ventilation system.

Quickly and effectively draw contaminated air away from the workplace with the Axial Inlet Adapter.

The 16" High-Output Electric Blower delivers the highest output of any axial blower on the market.

The easy-to-use DC Axial Blower with Canister-25 forms a complete ventilation system.

The high power 8" Axial Blower achieves a lightweight, low profile by using a 1/3 HP AC electric motor to power an axial fan.

Use the Air-Driven Blower for areas where an air compressor is available.

Featuring an 8" metal blower system with 15' duct built into a heavy duty polyester bag for all in one unit for ease of operation. Designed with zippered ends that allow blower use without removing blower from the bag.

All in one unit for ease of operation. Featuring a 12" metal blower system with 15' duct built into a heavy duty polyester bag. Designed with zippered ends that allow blower use without removing blower from the bag. 1/2 hp.

The lightweight Tent Heater can raise a work tent's temperature by 50 degrees.

The high-output propane Heater is designed exclusively for the Axial Blower.

These portable, submergible pumps discharge out the top, which allows continuous operation at low water levels and extended dry runs without overheating the motor. Includes synthetic rubber vortex impeller and wear-parts for greater durability.

This portable, lightweight Guard Rail Winch has a 300-lb capacity for moving equipment into and out of confined spaces. It is easily mounted on guard rails.

The free-standing Deluxe Work Tent can be assembled quickly from inside or outside, using two spring-loaded frames.

Rugged and economical, with all-steel construction and an internal shock absorber, the versatile Lynx Hoist System takes a maximum personnel load of 310 lb. (141kg), (a 10:1 design factor), and a materials load of up to 620 lb. (281kg), (a 5:1 design factor).

Sealed for safety from environmental elements, this three-way, man-rated Self-Retracting Lifeline has an integral self-contained bi-directional retrieval winch with built-in shock absorbing capabilities. Self-adjusting disc brake will stop a fall, limiting the arresting force to less than 900 lbs.

Corrosion and dent resistant Salalift II Winch is constructed of aluminum and stainless and zinc-plated steel, with a durable polyethylene housing. Manually operated, it is designed to handle personnel or materials.

Designed for raising/lowering, work support, or personnel rescue, the Salalift Winch has a triple braking system that includes two independent centrifugal brakes and one dead-man brake for maximum safety.

Designed for raising/lowering, work support, or personnel rescue, the Salalift Winch has a triple braking system that includes two independent centrifugal brakes and one dead-man brake for maximum safety.

Lightweight work support and rescue device the Salalift II Winch features a built-in overspeed brake with energy absorbing capacity that provides secondary fall protection. Designed for durability and light weight, the tripod is easy to set up and transport. Complete with quick-mount bracket for Salalift II winch attachment.

A Miller Tripod offers an excellent anchorage point for typical confined space and rescue systems that employ winches to raise and lower individuals through manholes or other similar entry points.

This portable 8 or 10’ tripod is an anchorage connector used for confined space applications.

The lightweight and portable Aluminum Tripod can be easily and quickly set up by just one person.

The Series #70 Universal Rescue System is a compact, lightweight rope system that enables one worker to raise or lower himself without assistance.

The SafEscape Automatic Descender is specially designed for smooth, automatic vertical and angular controlled descent from overhead cranes, towers, aerial lifts, oil derricks, platforms or other elevated work areas, allowing workers to rescue themselves in case of emergency.

A compact and economical self rescue system for those who frequently work at high above the ground.